Gaskets


Ring Joint Gaskets

These are metallic sealing rings suitable for high pressure and high temperature applications and are fitted in ring groove type flanges.

They are widely used in the Oil / Petrochemical industry and in valves and pipe work.

Spiral Wound Gaskets

The gaskets can seal fluid pressures up to 250 bar and temperature range of -200oC to 1000oC. The gasket is easy to install and remove   and will not cause damage to the flange surfaces. A combination of winding materials and metals are available which enable the gasket to meet the requirements of varied operating conditions


Flat Cut Gaskets and Sheets

Non metallic flat cut gaskets are widely used in many industries for a variety of applications.Cut to recognized industry standards or dimensions to suit customers individual requirements.Selection must consider temperature, application, media and pressure - technical support is available to assist in your gasket selection.

 

Flexible Graphite Sheet Products

Excellent sealing for extreme conditions withstanding heat, pressure and aggressive chemicals, - seals easily under moderate bolt loads.

Steel Re-Inforced Rubber Gaskets

They are efficient gaskets with excellent handling properties in styles to suit varied performance requirement especially where flanges may have imperfections or are required to seal under minimum bolt tightening.

 

 


Metal Jacketed Gaskets

Metal jacketed gaskets comprise of a thin metallic outer shell enclosing a resilient filler material. The gaskets metal case protects the resilient filler and is resistant to pressure, temperature and corrosion.


Water Jet Cutting/Plasma Cutting

This machine uses a combination of ultra high pressure water (55,000 psi) and cutting abrasive to cut through a large array of both hard and softer materials such as stainless steel, rubber, gasket sheet, plastics etc.

 

Serrated Metal Gaskets

SERRATED METAL GASKETS are very effective gaskets for sealing flange connections especially at elevated pressures and temperatures with fluctuating conditions. It has the reliability of a metal to metal seal along with a soft sealing face to provide a tighter joint and excellent anti blow-out and sealing properties.

Flange Insulating Sets

Flange insulating sets are used in flange applications where electrical isolation and resistance to corrosion are required.
Temperature range for the phenolic gasket is -54c to 104c. Dielectric strength 500 volts/ Mil.
Phenolic sleeve operating temperature is -29c to 107c. Dielectric strength 400 volts/ Mil.Water absorbsion is 1.6%


 
 

Home | About | Projects | Enquiries | Contacts
© 2009 Archon BMT, Dubai, UAE